Description
ENGINE
| Gross Power – SAE J1995 | 67.1 HP |
| Net Power – SAE 1349 | 65.8 HP |
| Displacement | 134.3 in³ |
| Stroke | 3.9 in |
| Bore | 3.3 in |
| Peak Torque – 1,500 rpm – SAE J1995 | 153 ft·lbf |
| Net Flywheel Power | 65.8 HP |
| Net Power – ISO 9249 | 66.5 HP |
| Engine Model | Cat C2.2 CRDI |
OPERATING SPECIFICATIONS
| Rated Operating Capacity | 1900 lb |
| Tipping Load | 3800 lb |
| Breakout Force – Tilt Cylinder | 3928 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Rated Operating Capacity with Optional Counterweight | 2000 lb |
WEIGHTS
| Operating Weight | 6514 lb |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
DIMENSIONS
| Wheel Base | 41.5 in |
| Height – Top of Cab | 79.9 in |
| Vehicle Width over Tires | 58.9 in |
| Ground Clearance | 6.7 in |
| Departure Angle | 27.9° |
| Maximum Dump Angle | 47.4° |
| Length – Without Bucket | 99.3 in |
| Clearance at Maximum Lift and Dump | 88.7 in |
| Bucket Pin Reach – Maximum Lift | 8.8 in |
| Maximum Overall Height | 150.9 in |
| Turning Radius from Center – Machine Rear | 59.6 in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
| Bucket Pin Height – Carry Position | 8.4 in |
| Length – With Bucket on Ground | 127.3 in |
| Bumper Overhang – Behind Rear Axle | 35.2 in |
| Turning Radius from Center – Bucket | 77.8 in |
| Maximum Reach – With Arms Parallel to Ground | 49.2 in |
| Bucket Pin Height – Maximum Lift | 118.1 in |
| Reach – Maximum Lift/Dump | 25.7 in |
| Rack Back Angle – Maximum Height | 88.2° |
| Turning Radius from Center – Coupler | 43.4 in |
HYDRAULIC SYSTEM
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow | 26 gal/min |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 35.5 HP |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure | 3336 psi |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 18 gal/min |
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3336 psi |
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) | 50.9 HP |
CAB
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
POWER TRAIN
| Travel Speed – Forward or Reverse – One Speed | 7.6 mile/h |
| Travel Speed – Forward or Reverse – Two Speed Option | 11.1 mile/h |
SERVICE REFILL CAPACITIES
| Cooling System | 3.2 gal (US) |
| Engine Crankcase | 2.6 gal (US) |
| Fuel Tank | 15.1 gal (US) |
| Hydraulic System | 11.9 gal (US) |
| Hydraulic Tank | 9 gal (US) |
| Chain Box – Each Side | 1.8 gal (US) |
