Talmak Tarim Alet Makina Ltd. Sti.

Driving profitable farms with planetary balance 100% electric drive selection Data-driven You can find all vehicles in our online store.

Skid Steer Loaders 226D3

KEY SPECS

Gross Power – SAE J1995
67.1 HP
Rated Operating Capacity
1550 lb
Operating Weight
5849 lb
Category:

Description

ENGINE

Gross Power – SAE J1995 67.1 HP
Net Power – SAE 1349 65.8 HP
Displacement 134.3 in³
Stroke 3.9 in
Bore 3.3 in
Engine Model Cat C2.2 CRDI
Peak Torque – 1,500 rpm – SAE J1995 153 ft·lbf
Net Power – ISO 9249 66.5 HP

OPERATING SPECIFICATIONS

Rated Operating Capacity 1550 lb
Rated Operating Capacity with Optional Counterweight 1650 lb
Tipping Load 3100 lb
Breakout Force – Tilt Cylinder 3927 lb
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

WEIGHTS

Operating Weight 5849 lb
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

DIMENSIONS

Wheel Base 41.5 in
Length – With Bucket on Ground 127.3 in
Length – Without Bucket 99.4 in
Height – Top of Cab 79.8 in
Vehicle Width over Tires 58.9 in
Maximum Overall Height 143.8 in
Bucket Pin Height – Maximum Lift 110.9 in
Bucket Pin Height – Carry Position 8.5 in
Reach – Maximum Lift/Dump 21 in
Clearance at Maximum Lift and Dump 81.8 in
Ground Clearance 6.9 in
Departure Angle 27.9°
Maximum Dump Angle 46.7°
Rack Back Angle – Maximum Height 88.9°
Bumper Overhang – Behind Rear Axle 35.2 in
Turning Radius from Center – Bucket 77.8 in
Maximum Reach – With Arms Parallel to Ground 50.7 in
Turning Radius from Center – Machine Rear 59.6 in
Turning Radius from Center – Coupler 43.5 in
Note * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted).

HYDRAULIC SYSTEM

Hydraulic Flow – Standard – Loader Hydraulic Pressure 3336 psi
Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure 3336 psi
Hydraulic Flow – Standard – Hydraulic Power (Calculated) 33.5 HP
Hydraulic Flow – High Flow – Hydraulic Power (Calculated) 50.9 HP
Hydraulic Flow – Standard – Loader Hydraulic Flow 18 gal/min
Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow 26 gal/min

CAB

ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level I

POWER TRAIN

Travel Speed – Forward or Reverse – One Speed 7.6 mile/h
Travel Speed – Forward or Reverse – Two Speed Option 11.1 mile/h

SERVICE REFILL CAPACITIES

Chain Box – Each Side 1.8 gal (US)
Cooling System 3.2 gal (US)
Engine Crankcase 2.6 gal (US)
Fuel Tank 15.1 gal (US)
Hydraulic System 11.9 gal (US)
Hydraulic Tank 9 gal (US)

AIR CONDITIONING SYSTEM (IF EQUIPPED)

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.