Description
ENGINE
| Net Power | 69.5 HP |
| Engine Model | Cat C3.3B |
| Stroke | 4.7 in |
| Bore | 3.7 in |
| Gross Power – SAE J1995 | 74.3 HP |
| Displacement | 203 in³ |
| Rated Net Power – 2,200 rpm – U.S. EPA Tier 4 Final/EU Stage V – ISO 9249/EEC 80/1269 | 69.5 HP |
WEIGHTS
| Operating Weight | 20077 lb |
| Note (1) | *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket. |
| Note (2) | **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket. |
| Maximum Operating Weight with Cab** | 20077 lb |
| Minimum Operating Weight with Cab* | 18610 lb |
WEIGHT INCREASE FROM MINIMUM CONFIGURATION
| Steel Tracks with Pads | 752 lb |
| Counterweight | 552 lb |
| Long Stick | 146 lb |
TRAVEL SYSTEM
| Maximum Traction Force – High Speed | 6250 lb |
| Ground Pressure – Maximum Weight | 5.8 psi |
| Ground Pressure – Minimum Weight | 5.4 psi |
| Travel Speed – High | 3.2 mile/h |
| Travel Speed – Low | 1.9 mile/h |
| Maximum Traction Force – Low Speed | 15175 lb |
| Gradeability – Maximum | 30 degrees |
SERVICE REFILL CAPACITIES
| Fuel Tank | 39 gal (US) |
| Hydraulic System | 29 gal (US) |
| Hydraulic Tank | 14 gal (US) |
| Cooling System | 2.6 gal (US) |
| Engine Oil | 3 gal (US) |
HYDRAULIC SYSTEM
| Digging Force – Bucket | 13946 lb |
| Operating Pressure – Travel | 4134 psi |
| Operating Pressure – Swing | 3626 psi |
| Operating Pressure – Equipment | 4134 psi |
| Digging Force – Stick – Long | 8032 lb |
| Type | Load Sensing Hydraulics with Variable Displacement Piston Pump |
| Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. |
| Pump Flow at 2,400 rpm | 44 gal/min |
| Digging Force – Stick – Standard | 9509 lb |
| Maximum Auxiliary Circuit – Primary – Pressure at Pump | 4134 psi |
| Maximum Auxiliary Circuit – Secondary – Pressure at Pump | 4134 psi |
| Maximum Auxiliary Circuit – Primary – Flow at Pump | 35 gal/min |
| Maximum Auxiliary Circuit – Secondary – Flow at Pump | 9 gal/min |
SWING SYSTEM
| Machine Swing Speed | 10.6 r/min |
| Boom Swing – Right | 50 degrees |
| Boom Swing – Left | 60 degrees |
BLADE
| Height | 17 in |
| Width – Standard | 90.6 in |
| Width – Wide | 96.5 in |
CERTIFICATION – CAB
| Top Guard | ISO 10262:1998 (Level I) |
| Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 |
| Tip Over Protective Structure (TOPS) | ISO 12117:1997 |
SOUND
| Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) |
| Note | European Union Directive “2000/14/EC” |
| Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) |
DIMENSIONS – STANDARD STICK
| Cab Height | 100 in |
| Vertical Wall | 117.8 in |
| Boom In Reach | 120.4 in |
| Tail Swing with Counterweight | 62.4 in |
| Boom Swing – Right | 36.8 in |
| Track Belt/Shoe Width | 17.7 in |
| Maximum Reach | 281.1 in |
| Stick Length | 71.7 in |
| Maximum Blade Height | 14.6 in |
| Boom Swing – Left | 23.8 in |
| Maximum Blade Depth | 16 in |
| O/A Track Width | 90.6 in |
| Maximum Dig Height | 265.2 in |
| Maximum Dump Clearance | 187.4 in |
| Maximum Reach – Ground Level | 273.6 in |
| Tail Swing without Counterweight | 57.1 in |
| O/A Undercarriage Length | 113.4 in |
| Swing Bearing – Height | 29.7 in |
| Ground Clearance | 13.8 in |
| Dig Depth | 161.7 in |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Overall Shipping Length – with Counterweight | 264 in |
| Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. |
| Overall Shipping Length – without Counterweight | 258.8 in |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Height – Boom Working – With Tools** | 104.7 in |
| Height – Boom Transport – No Tools* | 95.7 in |
DIMENSIONS – LONG STICK
| Dig Depth | 182.8 in |
| Boom Swing – Left | 23.8 in |
| Maximum Dig Height | 277.1 in |
| Maximum Blade Height | 14.6 in |
| Track Belt/Shoe Width | 17.7 in |
| Cab Height | 100 in |
| Tail Swing with Counterweight | 62.4 in |
| O/A Undercarriage Length | 113.4 in |
| Maximum Dump Clearance | 199.7 in |
| Boom Swing – Right | 36.8 in |
| Maximum Blade Depth | 16 in |
| Ground Clearance | 13.8 in |
| Stick Length | 92.8 in |
| Maximum Reach | 300.7 in |
| Maximum Reach – Ground Level | 293.7 in |
| Boom In Reach | 126.6 in |
| Swing Bearing – Height | 29.7 in |
| O/A Track Width | 90.6 in |
| Tail Swing without Counterweight | 57.1 in |
| Vertical Wall | 134 in |
| Note | *Boom Height when stick is pinned in transport position with no attachments. |
| Note (2) | ***With blade positioned at the rear of the machine. |
| Note (1) | **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position. |
| Height – Boom Transport – No Tools* | 89 in |
| Height – Boom Working – With Tools** | 120.1 in |
| Overall Shipping Length – without Counterweight | 6872 mm (270.6 in)*** |
| Overall Shipping Length – with Counterweight | 6872 mm (270.6 in)*** |
