Description
ENGINE
| Gross Power – SAE J1995 | 67.1 HP |
| Net Power – SAE 1349 | 65.8 HP |
| Displacement | 134.3 in³ |
| Stroke | 3.9 in |
| Bore | 3.3 in |
| Engine Model | Cat C2.2 CRDI |
| Peak Torque – 1,500 rpm – SAE J1995 | 153 ft·lbf |
| Net Power – ISO 9249 | 66.5 HP |
OPERATING SPECIFICATIONS
| Rated Operating Capacity | 1550 lb |
| Rated Operating Capacity with Optional Counterweight | 1650 lb |
| Tipping Load | 3100 lb |
| Breakout Force – Tilt Cylinder | 3927 lb |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
WEIGHTS
| Operating Weight | 5849 lb |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
DIMENSIONS
| Wheel Base | 41.5 in |
| Length – With Bucket on Ground | 127.3 in |
| Length – Without Bucket | 99.4 in |
| Height – Top of Cab | 79.8 in |
| Vehicle Width over Tires | 58.9 in |
| Maximum Overall Height | 143.8 in |
| Bucket Pin Height – Maximum Lift | 110.9 in |
| Bucket Pin Height – Carry Position | 8.5 in |
| Reach – Maximum Lift/Dump | 21 in |
| Clearance at Maximum Lift and Dump | 81.8 in |
| Ground Clearance | 6.9 in |
| Departure Angle | 27.9° |
| Maximum Dump Angle | 46.7° |
| Rack Back Angle – Maximum Height | 88.9° |
| Bumper Overhang – Behind Rear Axle | 35.2 in |
| Turning Radius from Center – Bucket | 77.8 in |
| Maximum Reach – With Arms Parallel to Ground | 50.7 in |
| Turning Radius from Center – Machine Rear | 59.6 in |
| Turning Radius from Center – Coupler | 43.5 in |
| Note | * Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, single speed, 1576 mm (62 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, C1 cab (OROPS, mechanical seat), 850 CCA battery, manual quick coupler, no self level and no optional counterweights (unless otherwise noted). |
HYDRAULIC SYSTEM
| Hydraulic Flow – Standard – Loader Hydraulic Pressure | 3336 psi |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Pressure | 3336 psi |
| Hydraulic Flow – Standard – Hydraulic Power (Calculated) | 33.5 HP |
| Hydraulic Flow – High Flow – Hydraulic Power (Calculated) | 50.9 HP |
| Hydraulic Flow – Standard – Loader Hydraulic Flow | 18 gal/min |
| Hydraulic Flow – High Flow – Maximum Loader Hydraulic Flow | 26 gal/min |
CAB
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
POWER TRAIN
| Travel Speed – Forward or Reverse – One Speed | 7.6 mile/h |
| Travel Speed – Forward or Reverse – Two Speed Option | 11.1 mile/h |
SERVICE REFILL CAPACITIES
| Chain Box – Each Side | 1.8 gal (US) |
| Cooling System | 3.2 gal (US) |
| Engine Crankcase | 2.6 gal (US) |
| Fuel Tank | 15.1 gal (US) |
| Hydraulic System | 11.9 gal (US) |
| Hydraulic Tank | 9 gal (US) |
AIR CONDITIONING SYSTEM (IF EQUIPPED)
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
